Toyota Yaris 2011 Tokai Rika immo 89780-0D070

E

earlst5629

New member
Hi all , having murders with this , it’s last of old shape Yaris but has an 80 bit immo on it , reset by obd using tango plus , didn’t know it was Tokai Rika , added key one 80 bit page 1 37 , it took it , wouldn’t not add key 2 80 bit page 1 57 & would not run , says added key 2 but key count never goes to 2 master keys & in fault codes says encryption error

Reset again tried adding key 1 page 1 36 & key 2 page 1 56 , same , any info or help be grateful

Removed immo , read file added keys on bench 37 & 57 as says 36 & 57 wrong type , still same won’t run , we have tried with cn5 made into correct keys & genuine chips from genuine keys

Got me stumped as unsure if tango plus has messed it up or tango is has made the chips wrong

Tango has timed out now for 24 hours so can’t produce any more chips

We have added 2 genuine keys to dump page 1 37 key 1 page 1 57 key 2 but don’t think it’s upped the key count , can someone check the dumps please to see if key count is 2

Thanks in advance
 

Attachments

  • redyarisbolton11.rar
    564 bytes · Views: 25
Your file looks like already resetted. Just cycle 2 keys in then turn the key ON and OFF 5times.
.
If that doesn't solve the problem you can get another good dump (same part number), program a chip with key maker, then write the generated file to your immobox.
.
Then do the 35minutes sync.
 
Try it mate, i'm pretty sure it will solve your problem. ;)

Anyway, have you tried 4D67? I have a suspicion that it may be a 4D67. Your dump may looks encrypted, however an encrypted dump doesn't necessarily mean it's a G key. I have found an encrypted 4D67 dump that belongs to a Camry back then. Try 4D67 before you try the first one i told.
 
Fixed , tango plus messed it up , thinks it’s an 80 bit immo when it’s a 40 bit
Even loading file after reset tango saw it as 80 bit
Got file of same immo looks 80 bit but was 40 bit id70 job complete
 
earlst5629 said:
Fixed , tango plus messed it up , thinks it’s an 80 bit immo when it’s a 40 bit
Even loading file after reset tango saw it as 80 bit
Got file of same immo looks 80 bit but was 40 bit id70 job completynmb
Click to expand...

Hi I got similiar situation can you share good dump for

89780-0D070​

Thanks
 
You must log in or register to reply here.
Back
Top