Toyota Passo 2011 0 keys

[electrocar_pe]

hello all, a query, I have this passo toyota 2011 for lost key, but does not recognize the tango immo, someone will know what kind of key occupies, and how could give solution. thanks, attached photos and immo ecm and dumps.

 

[robbert]

View attachment Reset dump Passo.rar89990-B1060 freekey and with 4D Page 1 = 3D
89561-B1010

Learning 1 first key procedure is = write the virgin dump your eeprom.
Then put key in ignition and push with twisting knob and remove key.
With just your finger, push only the turning knob. Your immo light will start flashing, then insert your key again in ignition. Then leave it in, untill the doors lock unlock automaticaly . Then your key is learned.
If it does not start, bridge obd 4 and 13 with ignition on for 5 minutes.

Add more keys by obd, and add remote by obd for freekey.

 

[ucokseparoh]

Hi Robbert..

may i know what tool did you use to reset that file? been wondering about for it sometimes watching some fellows too from another forum who can do this also. It is meant to virginize the dump right? Sorry if it sounds a bit ignorant,i'm new to this and is really keen to learn.

Thanks for any help.

Best regards..

 

[robbert]

A college helped me out.
He has got some virgin dumps.
I guess that they read the virgin data from new parts.

Some use software for this, but i am not sure what programs do this.
I believe avdi and tm100, do some toyotas.

One day Tango perhaps.

 

[PORTER]

how did it go Robert? did ur passo start and by what procerdure? can you please send me the virgin dumps to this mail,samwelporter@gmail.com

 

[robbert]

download the file in this post.
MAke sure you have the correct partnumber.
The car will start.

how did it go Robert? did ur passo start and by what procerdure? can you please send me the virgin dumps to this mail,samwelporter@gmail.com

 

[electrocar_pe]

robbert hello, good, thank you for answering, I've made the process as indicas me but not recorded in the reset key file, you can help me appreciate a little more on this subject, which is the key that should occupy 4d 60-- -4d 67, ?? nose que key type test, fails to open the latches, I leave my email please electrocar_pe@hotmail.com

 

[robbert]

Maybe even a 4C transponder. I am not 100% sure.
I have written 4d, in my dump files collection. Butt i can not find any other confirmation.
Daihaistu boon uses the same system!

 

[vova020]

robbert hello, good, thank you for answering, I've made the process as indicas me but not recorded in the reset key file, you can help me appreciate a little more on this subject, which is the key that should occupy 4d 60-- -4d 67, ?? nose que key type test, fails to open the latches, I leave my email please electrocar_pe@hotmail.com

скинул на EMAIL

 

[JouBernard]

hello all, a query, I have this passo toyota 2011 for lost key, but does not recognize the tango immo, someone will know what kind of key occupies, and how could give solution. thanks, attached photos and immo ecm and dumps.

Hello Electrocar
have you ever has progress on this Car coz i have the same car with same issue and the same part numbers,i need assistance on this if you got a solution

 

[keyscars]

hello all
I have the a 2009 Toyota Passo settle IMMO box: 89990-B1050 will this file work with lost keys as I can't even add one key
its a two button smart key ( 4D ) like you get on the 2006 Toyota verso ( but verso is not keyless )
I got a file from a guy in Pakistan paid him but that file is not for the Passo settle
thanks for your help