So I have all 4 dump files but when i go to load smartkey ecu i get "There is a damaged data of the key's counter in the dump. Make first a key with the keymaker" the key count is 0. I have been sent the files so i dont have direct access to the car to add keys I believe he threw the vehicle out of sync when he tried to program keys unsuccessfully. Can someone help me fix this? Im not clear as to what im doing wrong. Thank you.
Toyota Dump Editor - need help
- Thread starter 007lnk
- Start date
admin
Moderator
1. Load the smart box dump in the Toyota Certification ECU keymaker, it will warn you that there are multiple errors in your dump, press Ok and continue, write one actual key and save the new file then write it back to the smart box.
After that go to the Dump editor load your IDcode, ESL, Engine ECU and the newly created smart dump.
2. Select IDcode+Smartkey ECU, press make synchro, then save new ID code ECU file.
3.Load the newly created IDcode file, select IDcode+Steering lock-> Make synchro-> Write Steering lock ECU - > Save Steering lock ECU
Then make sure you have written back all the new files : New smart dump from step 1, new IDcode from step 2 and new ESL from step 3.
The synchro with the engine ECU is fine, no need to change that.
After that go to the Dump editor load your IDcode, ESL, Engine ECU and the newly created smart dump.
2. Select IDcode+Smartkey ECU, press make synchro, then save new ID code ECU file.
3.Load the newly created IDcode file, select IDcode+Steering lock-> Make synchro-> Write Steering lock ECU - > Save Steering lock ECU
Then make sure you have written back all the new files : New smart dump from step 1, new IDcode from step 2 and new ESL from step 3.
The synchro with the engine ECU is fine, no need to change that.