Search results

Our little secret forum, is not so secret anymore. Every picture and text, is visible to anybody on the web. :cry: But I understand, this might be a way to get more customers to these products. Competition is difficult, for each and everyone.

Any chance, of getting these on the list. Some error occurred, while doing programming. So some error while preparing, and programming the first key. Which was quite expensive. Even if it was China product. (Remote OK, but not Keyless, and also Key start error - after register key and dash...

Never seen this before. The EEPROM text in these three lines, says probably: (3793-N 1008 E1-307 or ET307) And it does not have a small point, which shows where pin number one is on the eeprom. I think it is supposed to be 4C according VIN - When checking parts. And also received key code...

I need PIN for this one. KNDJP3AE7G7004785 Not sure if any tool I have, would read it. If possible key code as well. Just to be on the safe side. :roll:

A lot of numbers. And easy to be confused. Sometimes it seems that the different vendors write different about some of the keys. 5button ORIGINAL Smart Key for Volvo C Buttons:5 / Frequency:434MHz / Transponder: PCF7945/ ID46 VIRGIN / Blade signature:HU101 / Immobiliser System:Smart / Part No...

This is info from Barrecuda site: External power supply unit 9-24V DC, plug size 5.5x2.1mm I am connecting to the tool via a standard 12V car battery. Maybe I need to give it a charge. Since there is a while since last time. Using cable plug size 5.5x2.1mm It was included in the Smelecom...

I wrote some ID44 images on 7935 a while back. Planning to do a VW. But the job was cancelled in the last minute. Would I run into any issues reusing them on EWS BMW directly? Need to modify back to 7935 in some way? Or just order new ones?

I see VVDI2 has the feature to unlock all ID48 dealer keys written with VVDI2. Is it possible to make this feature on Tango as well? Before I break the shell on the Chinese 5K0837202 key, and replace the glass ID48. And then have to use superglue on the shell, to make it fit again.

Nice to read about the new tool. This would be Scorpio's own developed programmer - with the benefits from Orange-5 and Omega? I hope that PCB's from Orange-5 supersede, so it can be used with the BARRACUDA programmer. Is it necessary to purchase a new HPX package, or is it included in the...

Running Windows 7 English 64 Done all the latest Windows update. Tango ver 1.109 Main OBD cable is Mini-VCI J2534 - China - Techstream 10.30.029 Driver is found automatically on Windows search on internet. I think this is because of English version. Other Windows7 PC with other language...

I am having a hard time searching for good info in the forum, at a specific carbrand. Is it possible to change some options in the "Advanced search" module to make it better. Like when starting a thread. Add options, so you can choose yourselves if you want to. To add carbrand, model, year...

The support in Tango stop from 2008 and forwards on the Kessy. For A8, Touareg and Cayenne. It can do 2003/2004 - 2008. According to the - "help maker" info in Tango - Interbrand - KESSY Is it like this? All models in 2008 have no support? Or is it also late 2007 models, which is considered...

Doing some testing. save the file. Size is 168byte. Tango needs 256byte file to open and add key. Smok keymaker can use this file and filesize and make key. But it seems to be a possibility to do it with Tango according to this subject...

I got these from a friend. Leftovers from freight company. I think maybe they come from a Forrester. Not sure about the age but maybe 2007-2010. I can see I can use TPX2 on them. Can I remove the org. transponder without problems. Like remote-control still working. I think it is the white unit...

Tried first to decode with machine. Broke the tip of my decoder. Read out the mechanical code manually from spear key blade. I place it in my A9. Does not cooperate. Error message and strange sound. Punched the "Stop button" real rapid. I made first a key blade in steel to confirm it was the...

Anybody tried this one out? Only possible to read ID48?

Could someone give some info here. When buying original VAG key from VW dealer 2009-2014 is it already prepared to VIN from factory or just cut and with the right transponder? If so, how to deal with it when using Tango and SuperVag? Or is it just dealer tool who can make these if they are...

One registered working key. ((F)VDI tried this as third OBD product in vehicle ). Unable to read/wake up 01 ECU engine for PIN. The same happened when I tried to read out the PIN with - key learning and chose 1281 POLO with 7935. (Someone have been here before me?) Have no BDM frame or any type...

Hi, guys! I am a rookie regarding key programming. But I am trying to learn. I had an accident With a Dash Can 5.17. I used earlier a VCDS to add working keys which worked just fine. The Dash Can deleted all keys. Is it possible to read out any info of the files I have added. Hopefully CS...