Problem with Baracuda - reseter not working

[Tihi02]

Hello,
since last week my Baracuda wont reset BMW, and Audi remote.
Opel is still working.
Other did not try.
Error in photo

 

[admin]

The error you get points out to a faulty PCF chip/bad connection, rather than an issue with the device itself.
Anyway the device can be sent for inspection and if needed repair though the distributor it was acquired from.

 

[didi_du_93000]

I have tested 15 reset of pcf7953 peugeot citroen smart key. ALL DON'T WORK. :-(

 

[Tihi02]

It worked for 5 years.
Today try with chip on pcb. Same thing.
Problem is I bought it in UK.
Today UK is not member of EU , and it will go again thru custom.
MSCL line no signal - thinking or CPU or pre chip... error

 

[fedor]

Good afternoon. you need to check SN74LVC1T45 on the adapter board, I had one that burned out, after replacing it, it worked