fauzi mahendry
New member
hallo ,
i am working on mazda tribute 2004 (denso 279700-2414)
someone has programmed the key with obd procedure (and has changed key data to 0)
I have tried again with the obd procedure, and after the data changes to 0 , I following the steps (turn on ignition with 3 seconds and repeat with the second key) but the key data still 0.
Then I tried to work with the tango program,
then i read eeprom 93c56 and program the key with tango .
tango detects key number 0 , then i program key 1 and tango create new data .
then I open new data, and tango show unknown version
help me
i am working on mazda tribute 2004 (denso 279700-2414)
someone has programmed the key with obd procedure (and has changed key data to 0)
I have tried again with the obd procedure, and after the data changes to 0 , I following the steps (turn on ignition with 3 seconds and repeat with the second key) but the key data still 0.
Then I tried to work with the tango program,
then i read eeprom 93c56 and program the key with tango .
tango detects key number 0 , then i program key 1 and tango create new data .
then I open new data, and tango show unknown version
help me