VOLVO BCM DELPHI R5F64524 BDM CONNECTION

[tomanycars]

folks , i'm need BDM connection for the above CEM for orange 5. ? (VOLVO BCM DELPHI R5F64524)

cem pic below

BDM connection




cem pic



thanks in advance

 

[tomanycars]

Never mind folks , orange 5 doesn't seem to want to read it.

 

[pavel-pervomaysk]

External power supply to the BCM & correct wiring.

 

[tomanycars]

External power supply to the BCM & correct wiring.

I couldn't find a decent wiring diagram for the orange 5. , I tried one and it wouldn't read , I tried another reader and that wouldn't read it. In the end I found a CAN coms connection so I can see if it even turns on and it doesn't nor did it communicate with the obd reader. I think the module was scrap.

 

[chris2011]

Orange is working well on this cem but you need lift rst pin.

 

[solitaire]

no need lift any pins
orange work perfect

 

[tomanycars]

no need lift any pins
orange work perfect

looks like a handy little pogo pin connector that's been used in the picture

 

[solitaire]

yes

 

[tomanycars]

yes

where did you get it from?

 

[solitaire]

where did you get it from?

made myself

 

[tomanycars]

made myself

Nice , what pogo header did you use ?

 

[robbert]

M30882fj found in Volvo cem. ( M32C )
Is there a working pinout someone could share.
I tried a few options, that worked with jtag and vvdiprog.
And try all frq and bdrates.

I consider buying a orange5, from a collegue.
And wanted to try it out first.

 

[Terry Field]

Nice , what pogo header did you use ?

Maybe

https://www.mouser.co.uk/c/connectors/headers-wire-housings/?contact%20gender=Pin%20%28Male%29&mounting%20angle=Straight&mounting%20style=Through%20Hole&number%20of%20positions=10%20Position&number%20of%20rows=2%20Row&product=Headers&termination%20style=Solder&type=Spring-Loaded