Nissan Juke 2011 - Prox

[ghkarim]

Hello Liubo,

I have Nissan Juke in lost key situation.
Programmed oiginal pox key pcf7952;
Result :
No ign on, no steering unlock, no dash on, No starts.
but remote works

I joined original and new dump read from 93c76.
ID on programmed : 68230A7C

Regards

 

[vova020]

did such a car through the OBD, SKP900
there was a complete loss of keys

 

[ghkarim]

did such a car through the OBD, SKP900
there was a complete loss of keys

yes I tried with SKP, no result
Yes, it is in lost key situation

 

[robbert]

Try to program this same key again.
Make sure you turn emergency lights on to keep the bcm awake.

 

[Mr. Fix]

Try by OBD with login EEFF2B6373DC.

 

[ghkarim]

Try by OBD with login EEFF2B6373DC.

will try and report
thk You

 

[ghkarim]

Failed,
as it is in lost key situation
may be cause device can't detect IGN on,

 

[Mr. Fix]

My mistake, sorry...
Login - BCFB39519E73

 

[ghkarim]

My mistake, sorry...
Login - BCFB39519E73

pin seems to be correct now but didn't start and no remote.
cause the remote stop working while in the morning after programming prox key by Tango , remote works
I am using X300, for the 1st time whyle programming , immo lamp turns OFF.
so i presume that pin is correct now.

but why steering don't unlock , strange

 

[Mr. Fix]

1) Write back in BCM you file 93c76 nissan juke new.bin;
2) . . .

 

[ghkarim]

All pages were read successfully with crypto key
But can’t write crypto lo and crypto hi
Message received: unable to write page 1

 

[Mr. Fix]

You key locked...
There are two variants:
1) Need new key and learn at OBD with login.
2) I can recalculate dump BCM for current key parameters, but sinchro in ECU need recalc and rewrite too. In this case dumps from ECU will be necessary (MCU and EEPROM).

 

[ghkarim]

Do you I think that with crypto key , I can virgenize actual key relearn it by obd.
What do you think ?

 

[Mr. Fix]

Crypto in key locked. You can't virgenize or rewrite this key.

 

[ghkarim]

I tried to learn new key by obd, no success - key still in crypto mode.
Note that steering lock Still locked
I tested also coil with AD30 tool : 100 % working

Let me inform on default code :
B2609 : Steering Lock Status
B2612 : Steering Lock Status (IPDM)
B2614 : ACC Relay circuit
B2615 : Blow Fan Motor Relay Circuit
B2616 : IGN Relay Circuit
B26EF : Steering lock Relay OFF
B26F2 : IGN Relay ON

May all this errors are related to one pb ( no working key ) Or may pb is in on of these relay ?
Wih all these infos help you to guide me.

Thank you

 

[ghkarim]

Hi Mr Fix,

car starts
With your precious help, job is done

thk you

 

[poxon77]

Hi Mr Fix can you please help with the pin for this juke?

Thanks Antony

 

[Mr. Fix]

Pin - E4167864A215

 

[poxon77]

Thanks I’ll report back and let you know how I get on, any news when it will be on tango?

 

[Terry Field]

Hi Mr Fix.
I also need help with the PIN for Nissan 2011 Note with Intelligent key/Twist ignition.
Dump attached (Glove-box label is missing)

View attachment Nissan Note Proximity 95080.rar

Thank you