M430F1232 Rexton

[yoryeg]

Hi Admin, excuse me, could you help me verify if this file (M430F1232) is correct for generating a key?
It's from a 2014 Sangyon Rexton inmo 97RI-012260, It was attempted to program by OBD and it did not work.
A while back, I made a similar one, but for an older Rexton. I could even see the PIN code, but now it doesn't appear in this one, and many more unused key positions appear.

 

[admin]

The dump is manipulated, likely failed by OBD.
One key is present, key counter is erased.
You can try doing emulator on it and see if the car starts, if it doesn't do actual keys on position 1 or 2.
If they also don't start synchronization with the engine ecu is incorrect.

 

[yoryeg]

The dump is manipulated, likely failed by OBD.
One key is present, key counter is erased.
You can try doing emulator on it and see if the car starts, if it doesn't do actual keys on position 1 or 2.
If they also don't start synchronization with the engine ecu is incorrect.

Thanks for the reply Admin, tested on emulator position 1, the vehicle starts very well