1.134

admin

Moderator
Hello ALL,

We have released Tango software update V1.134
  • Again FIRST in the WORLD! Image Generator Mazda ID14 and ID15 DST AES on LKP-04 & 06*
  • LKP06 for DST40/80: writing on this transponder allows not only start Toyota cars, but also supports Learn key procedure.
  • Bug Fixes

Note 1 - 16.12.2025 - Released V1.134.1 - bugfixes : Toyota 88, A8, A9, etc... while copying on LKP-06 & LKP-06 formatting for Hitag AES and Hitag Pro
 
Last edited:
СПАСИБО, отличная новость. С нетерпением ждем дальнейшего развития проекта.
 
Hello ALL,

We have released Tango software update V1.134
  • Again FIRST in the WORLD! Image Generator Mazda ID14 and ID15 DST AES on LKP-04 & 06*
  • LKP06 for DST40/80: writing on this transponder allows not only start Toyota cars, but also supports Learn key procedure.
  • Bug Fixes
Woohoooo THANK YOU SO MUCH!
wish list for Christmas = OBD2 support for 8A-BA & 4A so we don't have to deal with making connection to smart box, some are hard to get to

Quick thing, wonder why Tango cause the car system goes crazy with ALL system error/malfunction messages when programming smart key (8A-AA). I have to go back and clear all the error code via Techstream. It happened to me with USA market vehicles like 2022 Lexus ES300h, 2022 Lexus UX250h, 2021 Toyota RAV4 etc. Is that "normal" due to security "bypass" or whichever secrete technique to archive the goal of programming new smart key with SLK-08.
 
Last edited:
Tried Prox 88 clone onto LKP06 and it writes fine but chip doesn't start car. Same bug as previous version.
 
Please house can someone done a programing of land cruiser 2025 smart key lost using tango. Please can I use tango to program land cruiser 2025+ Smart Key lost?
 
Please house can someone done a programing of land cruiser 2025 smart key lost using tango. Please can I use tango to program land cruiser 2025+ Smart Key lost?
(USA market) You should be able to with Tango SLK-08 & Toyota FP-30 cable (for 8A P4:BA). Admin did post a reference video in "Tango 1.128 thread". Most smart box for truck/SUV is on the steering column side and for minivan/crossover/sedan is on the glovebox side. Hope that it can be done by OBD2 (no need to deal with smart box) soon like with most 8A P4:AA.

12-digit Pincode calculator intergrated to Tango would be really nice :) (for 8A blade key on newer Corolla/Rav4), just like the 6-digit Pass-Code by Seed Number (96 chars) already included
 
Last edited:
When I tried to register a Toyota Crown 8A-AA smart key using an SLK-08, I got a CVN error. How can I register it?

cvn not found please report us with error loglist


read cvn mode
database : 38
smart box id:8999A30280010202

GATEWAY 8911F-12030 01
 
When I tried to register a Toyota Crown 8A-AA smart key using an SLK-08, I got a CVN error. How can I register it?

cvn not found please report us with error loglist


read cvn mode
database : 38
smart box id:8999A30280010202

GATEWAY 8911F-12030 01
USA market, Toyota Crown is HYQ14FBX 8A-BA that need the FP-30 cable hook up to the smart box, at least for now. You sure it is 8A-AA?
Tango doesn't support ALL 8A-AA via OBD2 by the way, especially the unpopular models that the team didn't get a chance to get their hands on to add to the support list.
 
アメリカ市場では、トヨタ・クラウンはHYQ14FBX 8A-BAで、少なくとも今のところはスマートボックスに接続するにはFP-30ケーブルが必要です。8A-AAで間違いないですか?
ちなみに、Tango は OBD2 経由のすべての 8A-AA をサポートしているわけではありません。特に、チームが入手できずサポート リストに追加できなかった人気のないモデルはサポートされていません。
ありがとうございます。日本では220クラウンはテキサスAAでした。この車両を製作することは可能でしょうか?
 
Hello ALL,

We have released Tango software update V1.134
  • Again FIRST in the WORLD! Image Generator Mazda ID14 and ID15 DST AES on LKP-04 & 06*
  • LKP06 for DST40/80: writing on this transponder allows not only start Toyota cars, but also supports Learn key procedure.
  • Bug Fixes

Note 1 - 16.12.2025 - Released V1.134.1 - bugfixes : Toyota 88, A8, A9, etc... while copying on LKP-06 & LKP-06 formatting for Hitag AES and Hitag Pro
Hello all, I just want to confirm the successful of programming (same for add or AKL) used OEM smart key on USA market 2021 Toyota Sienna LE (FCC ID: HYQ14FBX, P4: BA) with the use of Tango V1.134.1 + SLK-08 +VXDiag VCX SE + Toyota FP30 cable and especially clone from OEM smart key to LKP-06 to start the vehicle with LKP-06.

wish list = can clone Hitag-type smart key to LKP-XX just like cloning DST-type smart key to LKP-02/04/06 :)

*****just did a 2025 Lexus RX350h using OEM used smart key (HYQ14FLC, P4: BA) and OEM used smart card (HYQ14CBP, P4: BA) and clone to LKP-04 to start the vehicle; everything was flawless with Tango & SLK-08, just a bit of a pain to swerve around with the 30-pin connector on the smart box side (I kept the removal of parts on the vehicle to the minimal) and that was about it*****
 
Last edited:
@admin

Были изменения в VOLVO, 28F400, Meg48? При добавлении или замене ID ключа меняет в нескольких места в дампе, что на мой взгляд - Ошибка
 
@admin

Были изменения в VOLVO, 28F400, Meg48? При добавлении или замене ID ключа меняет в нескольких места в дампе, что на мой взгляд - Ошибка
Без конкретные дампов ничего не сказат. Посмотрел с несколко дампов, в настоящая версия софта не обнаруживается такое поведение о которое пишете.
 
88228063.PNG
Без конкретные дампов ничего не сказат. Посмотрел с несколко дампов, в настоящая версия софта не обнаруживается такое поведение о которое пишете.
Дамп, вариант замена 1 ключа и вариант добавления 3 ключа
 

Attachments

  • bad_result_key.zip
    349.1 KB · Views: 4
アメリカ市場では、トヨタ・クラウンはHYQ14FBX 8A-BAで、少なくとも今のところはスマートボックスに接続するにはFP-30ケーブルが必要です。8A-AAで間違いないですか?
ちなみに、Tango は OBD2 経由のすべての 8A-AA をサポートしているわけではありません。特に、チームが入手できずサポート リストに追加できなかった人気のないモデルはサポートされていません。
日本市場では、220系クラウンに使っているスマートキーは8A-AAでした。
この場合、8A-BAと同じようにコンピュータに接続すれば、追加登録できますか?
もしかして、プログラムを破壊しますか?
 
Back
Top