1.132

Hello
I cannot do the update. Software is downloaded and then program just stops working. Can You check it? Regards
 
EMCE said:
Hello
I cannot do the update. Software is downloaded and then program just stops working. Can You check it? Regards
Click to expand...
Hello,
Open this folder C:\Scorpio-LK\Tango\Temp, most likely you will find the newly downloaded Tango.exe there.
You can just move it to C:\Scorpio-LK\Tango.
If that's the case then you are missing the required libraries, which are part of the latest Tango setup file, so you can use it to reinstall the software :
https://scorpio-lk.com/downloads-tango.html
 
shogair said:
I tested Toyota+ version 10.4.
2023 Toyota Yaris Japanes Market.
Hitag AES BA key type.
It worked perfectly and I was able to register a used key.
I didn't experience any of the issues that occurred with the previous version, such as difficulty turning it on,
or even if I could turn it on, difficulty authenticating registered keys.

Thank you for the upgrade.
Click to expand...
Is that the same Yaris you've been testing all along?

Today I encountered an error like the one in the image while working on the 2024 Yaris Cross HV.
You've posted about the same error before—did this update resolve it?
Or had you already identified and fixed the cause of this error before the update?
 

Attachments

  • yaris cross.jpg
    yaris cross.jpg
    85.2 KB · Views: 45
tommy said:
Is that the same Yaris you've been testing all along?

Today I encountered an error like the one in the image while working on the 2024 Yaris Cross HV.
You've posted about the same error before—did this update resolve it?
Or had you already identified and fixed the cause of this error before the update?
Click to expand...
This is the vehicle I was testing.

I tested it when Ver. 10.4 was released, and the error on that screen occurred only once, but it hasn't happened since.
 
shogair said:
This is the vehicle I was testing.

I tested it when Ver. 10.4 was released, and the error on that screen occurred only once, but it hasn't happened since.
Click to expand...
Understood.
Your post is detailed and very helpful.
Thank you for your reply.
 
Hi good morning.
Wonder if anyone could please help with the issue we are facing.
Initially using version 10.4 we were getting the error message:
"Either ESL or ID code is not paired
- Use Barracuda solution to reset ESL/ID code.

OK, we updated to version 10.5
Now this message is gone OK.
But when soft asks for touching SLK08 with start button it doesnt go on and after a while we get a new message saying:
"Timeout to supply existing key"

What is wrong please ??
Btw, we are working on a Yaris Smart key year 2021.

Thanks so much.
 
Mercury said:
Hi good morning.
Wonder if anyone could please help with the issue we are facing.
Initially using version 10.4 we were getting the error message:
"Either ESL or ID code is not paired
- Use Barracuda solution to reset ESL/ID code.

OK, we updated to version 10.5
Now this message is gone OK.
But when soft asks for touching SLK08 with start button it doesnt go on and after a while we get a new message saying:
"Timeout to supply existing key"

What is wrong please ??
Btw, we are working on a Yaris Smart key year 2021.

Thanks so much.
Click to expand...
The connection between emulator and key coil is getting interrupted, either you are not placing it correctly or moving it around.
It has to lie flat on the button and not be moved during communication.
Can be caused by very weak button coil too.
 
fedor said:
Hello,
Is it possible to use the SLK08 to record a working key for a BA HITAG Camry?
Click to expand...
I know Admin already replied "no".
I still don't quite get what you mean for "to record a working key"?
I have some used OEM Camry smart key, 4A HitagAES, HYQ14FBW and assuming I can use Tango with SLK-08 to program them to a vehicle by using the 30-pin cable and plug directly to smart box or plug directly to OBD2 for all AA/BA (in the future).
 
SF Auto Keys said:
I know Admin already replied "no".
I still don't quite get what you mean for "to record a working key"?
I have some used OEM Camry smart key, 4A HitagAES, HYQ14FBW and assuming I can use Tango with SLK-08 to program them to a vehicle by using the 30-pin cable and plug directly to smart box or plug directly to OBD2 for all AA/BA (in the future).
Click to expand...
The assumption for "record a working key" and the no answer is directly cloning a working key onto the emulator, i.e. via Tango clone machine function.
 
You must log in or register to reply here.
Back
Top