1.130

shogair said:
I tested the 2023 Toyota Yaris again, which I was previously unable to register with Ver10.0.

Tango ver. 1.130
Toyota+ ver. 10.1
SLK-08 sw ver. 3
View attachment 26278

Vehicle: Toyota 2023 Yaris (Japanese market) Hitag AES BA type.

The vehicle was turned on, but then I was unable to pass the registered key confirmation on the SLK-08 and it timed out.

It was the same no matter how many times I tried.

The smart key shown in the video is a used smart key that has already been registered to another car.
Click to expand...
Coils of SLK-08 are at the top (below the LEDs), you have to put the emulator lying on the start stop button and stay there.
When you move it around connection breaks, then starts again, then breaks and eventually times out.
 
admin said:
Coils of SLK-08 are at the top (below the LEDs), you have to put the emulator lying on the start stop button and stay there.
When you move it around connection breaks, then starts again, then breaks and eventually times out.
Click to expand...
Thanks for your reply.
I'll try doing it that way in the next test.
 
4D60 вообще не видит. Копирует только ID13. Вы работаете над исправлением копирования или оно теперь только по подписке? Не игнорируйте вопрос. Программу переустановил 2 раза с удалением всех старых файлов.
 
admin said:
Coils of SLK-08 are at the top (below the LEDs), you have to put the emulator lying on the start stop button and stay there.
When you move it around connection breaks, then starts again, then breaks and eventually times out.
Click to expand...
I tried the test again, but I still couldn't pass the authentication of the registered key.
No matter how many times I tried, it was the same.
 
shogair said:
I tried the test again, but I still couldn't pass the authentication of the registered key.
No matter how many times I tried, it was the same.
Click to expand...
The software displays the error message "Either ESL or ID code...". It means that ID code is not paired.
Use Barracuda to reset the ID code, next use Tango Toyota to pair the ID code, next you can learn a new key
 
admin said:
The software displays the error message "Either ESL or ID code...". It means that ID code is not paired.
Use Barracuda to reset the ID code, next use Tango Toyota to pair the ID code, next you can learn a new key
Click to expand...
This vehicle has a smart key that can start the engine.
The vehicle runs fine, but do I still need to reset and pair the ID code box?
 
Здравейте.
Някой срещал ли е при опит да прочете Тойота следният надпис 2701 няма достъп?
 
Добрый день...Админ,а что за проблемы с Ауди А6/Q7...Вроде всегда мейкер работал без проблем...а ТУТ такое с кейлесс ключами..Не идет по дампу из EZS, положить ключ в дамп...
 

Attachments

  • 5990226961617766382.jpg
    5990226961617766382.jpg
    260 KB · Views: 47
  • 5990226961617766383.jpg
    5990226961617766383.jpg
    261.8 KB · Views: 44
The new version you released has issues while writing 4d transponders. i have tried writing mazda id 63 pop up-widow appears says Error to write transponder does not reply. i tried write suzuki maruti 4d65 says the same.
 
admin said:
The software displays the error message "Either ESL or ID code...". It means that ID code is not paired.
Use Barracuda to reset the ID code, next use Tango Toyota to pair the ID code, next you can learn a new key
Click to expand...
shogair said:
This vehicle has a smart key that can start the engine.
The vehicle runs fine, but do I still need to reset and pair the ID code box?
Click to expand...
Hi.
I also encountered this problem during testing. Sometimes it works, sometimes it doesn't.
Yesterday I couldn't register the key in Hilux, reading error slk 08.
I added the keys with an older slk 05 mod. I guess the software needs some more work.
Best regards
 
Привет, форд фокус с 4d id60, при попытки генерации ключа даёт ошибку на этапе записи крипто ключа...
 
You must log in or register to reply here.
Back
Top