Search results

Hello all, May someone can help me, I add new key to this car I read Dflash and P flash. When connect bcm back to the car is tiking and no switch on. Any advice?

Hello admin, Please add me to WhatsApp group +972506671266

Hey members, looking for working dump 93C56 ECU DENSO 89560-97403 And Immo box 93lc66

hello all, can someone help to pair both files for sirion 2004 transponder chip is 4c, please any idea just to start the car, i dont mind immo off, i attached both files engine ecu part #112000-9392_ 93c56 and immo box part # 89702-97419_93c66

Hello all, somone know if there is any solution to program new key yet? I know it's been for long time to find a solution . Maybe somone know what tool the dealer used? I tried G scan 2 and no work

Hello all, I would like to ask I have problem to program the key, after made new key it look like uch need to be sync to ecu. I got the original pin code, And when I program the pin to UCH by autel it stopped and lost communication. Any idea what to do

hello all, i just read dump and make new key, bike no start , can someone have any solution please? i attached dump

hello, somone can help me with new dump to this bike, i cant read eeprom, maybe overheat? please

hello all, someone may has idea how to program new key to this car, it should be very easy, but from some reason i got failed, i use x300 with 3 pin connector use chip 48 it ask how many keys, then turn ign off - On , the ask to type vin number, at the end it suppose to program the new key but i...

Hello all, I am trying to get the long match isn to make new key, I don't have a tool to read from egs, but I read with abrites 8 digit someone can convert it to long isn to make new key? I have also cas epprom and dme E71 95160 eeprom BF E4 D6 51 Thanks

Hello all, Please if someone have any idea, I try to add new key to this audi a4 convertible and I preaper CS and pincode And on cluster show 2 - 2 but car no start and messege 2-2 stay On , I removed battery and no help car no start even with original key, it doesn't even show SAFE, look like...

HELLO ALL. I HAVE AUDI A6 2005 THAT NO START ANYMORE, I CONNECT MY AVDI AND I SEE IMMO DATA PROBLEM IN KESSY UNIT, SO I READ CS AND LOGIN FROM ECU, I REMOVED KESSY AND I READ 9S12 ,256 EEPROM - IMMO DATA WAS ALMOST EMPTY_LOST DATA, AND FLUSH WAS OK. I INSTALLED NEW DUMP WITH A SAME MASK. NOW I...

Hello all, I have audi a6 2006 with bad dump. When I read kessy 9s12 immobilizer data lost and car no start, I do have original key, and read by avdi CS and pincode, There is someone can help me ? Instead buy new kessy unit? Thanks

HELLO ALL, i made new key and program new key with zedfull 95c320, and program on red chip of handy baby, now the truck is start BUT immo lights is flashing, and NO RPM when i press the gas pedal, someone has any idea?

HELLO ALL, i need to program new key to scania truck 2005, and look like tango dosent support this kind, somene know how do i get pin code? or whats the other way to program new key? the local dealer said he cant find pin code on system

Please if some one can help to get those codes TMAH3513GJJ064728

Hello all professional, I have a Renault fluense 2013 that lost battery voltage and stop start, I try renew uch by abrites online and still didnt fix the problem, base on clip Renault diagnostic tool i got error : status 1. Look like immobilizer code not program to injector modules. Please if...

hello all, i made new chip to this cbr 2006 93c56 and bike no start, hiss light stay on solid, i checked all wires that goes to ecu, and i check there is no signal from antenna ring when i turn ign on i tested with signal tester. ecu:38770-MEE-645 please any help

HELLO ALL, SOMEONE CAN TELL ME IF WE CAN MAKE NEW KEY TO THIS CAR? I USE VVDI AND CANT READ PASSWORD EVEN I USE POWER ADAPTER? I DID BEFORE 2010 NO PROBLEM. THIS ONE BEFORE 2009 NEVER DID. THANKS ALL

HELLO ALL, I HAVE CPU uPD70F3376 THAT I AM TRYING TO READ, BUT IS LOCKED SOMENE HAS IDEA WHAT TO DO TO READ IT AND SKIP SECURITY? THANKS