Search results

Buy a ezs emulator. They work well. Dont copy the flash!! Only write the eeprom to it. There are 2 eeprom file sizes possible. Old type, and new type. There is a tool, to adapt eeprom file if needed to the correct size.

Volvo systen. Ad a transponder, direct to the cem data. Car will start Take out the cem. Remote, a volvo remote key, might work. But you need a new one. with the remote coding labels.

Resolved, yes you are correct. There are 2 93c86. Many thanks

The 1 red cirkel

I read it, in circuit using orange5, at 3.3volt. Each time, i get the same data. It is a 2008 Actros 25.44 440hp V6

Could someone check, if this eeprom is recognised by Tango.

Solved, i made a small cut, in the foam. Now i can slide the keyblade true the hole.

Hello, is there a solution? This is the oem key, that always worked on this vehicle. Is it the position, of the key. Do i need to remove the foam, so i can position the key better in the reader?

M30882fj found in Volvo cem. ( M32C ) Is there a working pinout someone could share. I tried a few options, that worked with jtag and vvdiprog. And try all frq and bdrates. I consider buying a orange5, from a collegue. And wanted to try it out first.

Hello guys, 2021+ NX450h AZ20 I have been asked, to program a credit card shaped keyless key. They claim, it was ordered by vin. But did not want to register. I read out the oem present keyless key. And the card. P4: 00 00 B9 B9 oem key 8990H-48180 P4: 11 00 BA BA new card I was not able...

akl, best to order a oem key by vin. And program using a online Renault licence. I did a akl, using obdstar. Key and remote will work, but ecu wont start. So dont use obstar.

I read the IC502 93c86. It seems, it is not covered by Tango. Is there another way, to created keys?

Post kessy module partnumber. Without partnumbers, we can not help you , and others can not find this info if they ever need it.

112600-3842 21175-1213 Denso Z1000 Kawasaki 2019 Hello, I have seen some post dumps, but no sharing of where to cut the cdi. And what is written on the eeprom. Could someone share this. And it would help, if full label data is posted. So it helps others to find this info.

Hello, I have a W210 with immobox 210 820 32 26 XC68HC705X32 2D59J read with upa, MC68HC05X32. When loaded, in Tango, the key positions look strange. And mask 2D59J is not listed. Will i be able to create a key, that starts?

4A0953234F 93LC46 16bit Unknown version, when loaded in Tango. I found 2 dumps, both accepted. I removed the eeprom, this car, does start. And needs a extra key. ( this key is present 20 86 50 7E F6 ) Orange5 gave me login 01092. Is my file bad? Or not all dumps are supported?

XC90 Cem 2004+ 93C86 unknown version 30728357 04W336 12217779 Hello, i have a akl Volvo XC90. Is there a solution? Thanks

I removed all old soft. Then downloaded the latest from the link. And you told me, some time ago: And this is why i tested by running repack exe. Re: Tango not working and closing down by itself New postby admin » Wed Jan 20, 2021 12:05 am This behavior can only happen in a few very...

i can run tango, and update all. And Tango works ok. Only Toyota plus, does not appear. When i try to open it. Not direct in the plus folder, and not from the tango menu. Subaru plus,works ok. All is in the folder C:Scorpio-LK I removed and reinstalled reddpackage. Restarted, and run admin...