Search results

Size on 00400.dat 17kb only, can someone share only this file,I didn't check but think on suport is RAR file Tnx SOLVED

I copied full folder from till now working XP in win10 and win11 and can't clone ford id63, can't find dst files even I asign good path... Tried as administrator also ..... Sw says installation maybe will solve problem,but not wanna downloading Gb when I already have that dst table files. Any...

Also tiris 4e tango not detect, autel im508 detect ok same chip. By the way I not know why id13 not detect,as you said but I not have time to read all forums tools I have, I know all was ok and after update not works as did before, hope you'll fix soon Regards

Aa I see 4c not read directly as it did before, now must press Read..... so my keybinserted readed unknown transponder, reversed keybposition I guess will read ok, but still I prefer older tango and all worked perfect untill new updates....

If put 4C key reversed says family -------- Configuration read only Key inserted regular says unknown transponder 4d read ok,48 ok

To me nothing get better couse I not need Toyota's, with update I just lost working on XP and now must bring 2 laptops on the field to work. Same did smok uhds not suport xp but I needed update to lost XP, couse many sw I use works on XP only, but live goes on....

Finally ;) You mean china K+DCAN that is used fore INPA,and what sw to read EGS ISN, hope bot INPA? I have Autel IM508 hope can read EGS ISN? Should be 4 bytes EGS and 2 bytes ECU isn? Which tool convers thos short to long isn? Qnd why tango not put red flag that not enough ecu dump with short...

Why NEVER-EVER I get answer or help on this forum, isn;t this forum foe tango user??? I see on other forums this ecu has short 2 bytes ISN, but when load ecu dump in tango not says any error (If I put other ecu dump, TANGO says error and write key is disabled ) As I see some used EGS ISN 4 bytes...

Hi I have car all keys lost, read cas, tango ask for isn, I select ecu dump , tango accept, generate keys but keys not start car, just first ignition on dash , remote not works...engine not start. I had same situation with bad ISN. Any tips? ISN from ecu edc16, is it long isn or not.... Tnx

I did repair from same nr immo now tango see keys as nr1 but in DAS diagnose not see transponder Tried other superchip xhorse but same , transponder field nr in DAS is empty Tnx

Hi DAS diag shows no variant coding and no hw/sw number Key ori shows key 1 in tango but tango says eep bad Can be saved KEY becouse hard to get good pcf7935 ... tnx

Hi how to solve lost keys, immobox as golf3 without pin, in tango no ford immobox with hc05, dump recognized as vag immobox, but would work if I add key, because hard to find pcf7935 as it was... Tnx

Hi, This is my second clio that I made key,tango recognise as key3 but on car no start engine. First time I tried 4-5 transponders but solved by new pcb from scrapyard and 7846 swup. Uch is sagem,some goes ok but this us second that not work tango generated transponder. Ecu is sirius 34 Any info?

I need sync v70 1998year 2.3 petrol Eep ecu 9p08 Eep immo3 93c66 Ori ecu burned mcu,someone put eeprom and 29f800 fron iri ecu to donor but still car not start Tnx

I received china pcf7935, when read with tango says pcf7930 ID73 I generated opel 40, but when read that transponder tango says Opel ID33 Then I put empty chips in other reader, and there wrote ID44 for empty ones, fort that I generated opel says ID40. I not trusted thie reader goes to friend...

Hi S-max 2007,where is key location, in instrument cluster or in board computer or ecu? Ecu is sid206 Tnx P S. I think is in BCM

Hi, Before I did ~20 sagem uch, addedd empty place 3 to 7936 and all ok, now second time in row keys not works made by tango (7936), when I put ori 7946 in new pcb with good antena coil then car start. What is problem? Same 7936 I use for PSA cars and all ok tnx

I have ordered tpx 4 and when read info with tango says Pcf 7942/44 Locked Is it normal?

Car has ori key with 93c46 and antena coil, sometimes key not readed ok (many till now I made) and I removed coil read eeprom generated next empty key 3 then 4 and both not valid to immo, led fast blinking. Then I put new antena on ori key and all ok. Remote worked all time so mean dump readed...

I need to program vectra c with 93c76 in Cim. I have opel remote and put blank 7946. Can I program with opel maker to start engine? Not wanna buy maker then can't do job, because anyway no much need of opel except this case Please need answer because need to pay and finish job if possible Tnx