2013 Update for Tango v1.90

admin

Moderator
Hello to All ,

We have released today software update for Tango v1.90 .

It is the first online update for Tango. As such active and stable internet connection is required during the whole proccess.
To start the process you need to be running version 1.89.
If you are using Windows 7/Vista or get an error you will need first to manually install the fix 1.89r7,
which is found here : viewtopic.php?f=5&t=12331 and then procced further.
In order to update your software and hardware versions of Tango, plug in the PC your Tango programmer, start Tango.exe
and select Help -> Check updates, then follow the instructions that appear on the screen.
After update is complete, before starting the work you should close the program and reconnect Tango.
Disregard any messages that Windows may pop-up, because they are incorrect.

In order to avoid complications it is strongly advised to have your software installed in default directory in Program Files ( for Win XP) and Program Files (x32) for Win 7 and Vista users.

Also it has to be noted that the help file maker.chm is not automatically updated with this function, due to its size.
It has to be downloaded separately.
Here are the links:

http://www.scorpio-lk.eu/downloads/tango/1V90/maker.rar
or
http://www.scorpio-lk.com/downloads/Tango/maker.rar
or
http://scorpio-lk.telnet.bg/maker.rar

A list of changes can be found on our news section.
 
@AliWaileFaraj

You will need to connect your Tango to a PC with internet in order to update the hardware to version 1.62.
This makes atleast the initial installation to be mandatory done with active internet connection.
 
admin":1refmy0b said:
@AliWaileFaraj

You will need to connect your Tango to a PC with internet in order to update the hardware to version 1.62.
This makes atleast the initial installation to be mandatory done with active internet connection.
Thank u
 
Thank you for update.

FYI:
Tango Plus for Toyota "Failed to run".

Update:
After update new version v1.91.4 all function working perfect.

Thank you Lyubomir.
 
@koncimobil

We just tested it on few Tangos with Toyota activated and seems to be working with them.
Has problem with ones without Toyota maker. We will look into the matter and post solution or upload a fix on servers.
 
Mr. Lyubo thanks for the new update, I have doubts, what about 64-bits pc?

"In order to avoid complications it is strongly advised to have your software installed in default directory in Program Files ( for Win XP) and Program Files (x32) for Win 7 and Vista users."


Best regards.
 
admin":313kmakv said:
@koncimobil

We just tested it on few Tangos with Toyota activated and seems to be working with them.
Has problem with ones without Toyota maker. We will look into the matter and post solution or upload a fix on servers.
I get the same error but I have Toyota maker.
 
qtecautolabs":2fh9syvf said:
thanks for the update. but can one download update manually and install if tango is used on multiple systems?
Making update you'll get a new exe. Copy this exe on any PCs.
 
здравствуйте . при работе с танго я пользуюсь двумя компами . на стационарном обновление прошло автоматически , на ноуте не обновляется . выложите хотя бы фаил с новой версией для ручного обновления .
 
Back
Top