0609henrik
New member
Hi,
Can anyone in here help with this juke. Came in here as a AKL car, and i got the immo code from Nissan and tryed to program keys
by OBD, but without luck. I found out that the code was wrong, i read the Eeprom C76 in the BCM and programmed one key with Tango.
Now the remote is working, it seems that the car can see the key, if i hold it to push to start botton, but no ignition. Also tryed to program 2 keys by OBD, and it's the same problem.
Can the data in BCM corrupted?
Thanks in advance
Can anyone in here help with this juke. Came in here as a AKL car, and i got the immo code from Nissan and tryed to program keys
by OBD, but without luck. I found out that the code was wrong, i read the Eeprom C76 in the BCM and programmed one key with Tango.
Now the remote is working, it seems that the car can see the key, if i hold it to push to start botton, but no ignition. Also tryed to program 2 keys by OBD, and it's the same problem.
Can the data in BCM corrupted?
Thanks in advance